MerlettKA все записи автора

 

Воспоминания о лете и отпуске Миниатюра вышитая крестом, в которую вшита объёмная  морская звезда  3D эффектом   Мастер-класс по вышивке Описание есть, но на английском

		1 Position a pin vertically through your fabric at the point of the first arm of the starfish. Push your needle and three strands of thread up at (1), wrap behind the pin and push the needle down at (2).
		2 Bring the needle and thread up at (3), wrap behind the pin head in the direction of (4), creating three vertical stitches to form the ‘frame’ of the woven picot stitch.
		3 Next, start weaving the needle and thread under and over the three vertical stitches in the direction of (5). Don’t stitch through the fabric at any stage of your weaving.
		4 Then weave the needle over and under the three vertical stitches in the opposite direction, as per (6).
		5 Continue working back and forth, alternating the weave direction, building up your stitch down the length of the three vertical stitches.
		6 When you get to the base of the ‘frame’, push the needle to the back of the fabric and secure under nearby stitches, then remove the pin.
		7 You can leave the woven picot stitch as it is and have fun shaping the starfish arm to create a 3D effect, or you can stitch it to the fabric at the tip with a small single stitch.
		8 Repeat steps 1-7 to create four more woven picot stitches at angles around your central whole stitches, using the chart as a guide.   This will create a 3D effect starfish!